Thursday, June 13, 2013

USB Cat5e Extension Cable Mod

     ใครที่เคยใช้สายต่อ USB หรือ USB Extension Cable เป็นประจำ โดยเฉพาะสายราคาถูกคงเคยเจอปัญหาสายขาดใน หรือสัญญาณติดๆ หลูดๆ กันบ้าง  สำหรับในวันนี้เราจะแสดงเปลี่ยนสาย USB เดิมเป็นสาย Cat5e ที่ใช้เดินสาย LAN แทน  เนื่องจากเป็นสาย Twisted Pair ที่มีคุณภาพดีและมีความคงทนอีกด้วย หรือใครจะลองใช้แบบ STP ที่มี Shield ด้วยก็น่าจะดียิ่งขึ้น

อุปกรณ์ที่ต้องใช้
  • หัวแร้ง + ตะกั่ว
  • คัตเตอร์ปากกา หรีอคัตเตอร์คมๆ
  • ไขควงแบน
  • สว่านไฟฟ้า และดอกสว่าน
  • สาย Lan Cat5e ความยาวตามต้องการ

    USB Extension Cable is a very useful cable for many places like Home Theater PC or while working on-site. But such cable (especially the cheapest one) suffered from the major problem - They frequently broken because of the very thin copper wiring inside are prone to be broken.  First, it causes a spontaneous disconnection. Then it may not work at all.  This mod will replace it with a more durable Cat5e Ethernet Cable.  I use UTP(Unshielded) version but a Shield STP Cable would be better at interference resistance.

Tool and Material Required
  • Soldering Iron + Soldering Wire
  • Pen-style cutter or a sharp ordinary cutter.
  • Flat-head screwdriver.
  • Electric Drill and a Drillbit.
  • A Cat5e Ethernet Cable of the desired length.

   ขั้นตอนแรกให้ใช้คัตเตอร์ปากกา เสียบเข้าไปตามตำแหน่งดังรูป เพื่อตัดสายไฟด้านในที่ต่อเข้ากับหัว USB ให้ขาดออก  เพื่อเราจะได้ถอดหัว USB ออกได้


  To remove a metallic USB connector from a plastic boot. First, we have to cut the internal wiring by pushing a pen-style cutter through a USB head at the red line position in the above picture.

     เสียบคัตเตอร์ปากกาเข้าไปให้สุด

     Push the cutter all the way through.


     จากนั้นใช้ไขควงแบบแซกเข้าไปรอบๆ หัว USB ที่เป็นโลหะเพื่อให้หลวมพอที่จะงัดออกมาได้


     Then use a flat-head screwdriver to loosen the plastic boot around the metallic connector.


    ดึงหัว USB ที่เป็นโลหะออกมา

    Pull the metallic USB connector out.


    จะเห็นว่าด้านในของหัวจะมีพลาสติกอุดอยู่  เราจะต้องเจาะมันออกเพื่อให้มีที่พอสำหรับสายใหม่


    You will found that an internal cavity is also plugged with plastic. We have to drill this plastic out to make a room for a new cable.


    ให้ตัดสายด้านหลังของหัว USB ให้ชิด แล้วใช้สว่านทะลวงผ่านดังรูป

    Cut the old cable as close as possible to the plastic boot. Then use an electric drill to drill out the remaining.


     อันนี้คือสายเดิม  จะสังเกดได้ว่าตัวนำ(ทองแดง?) มีขนาดเล็กและเปราะบางมาก  และไม่มีการ Shield ใดๆเลย

    This is the old problematic cable. You can see that it has no shielding at all. And the wiring has a very thin copper.

   
    นี้คือสายที่เราจะใช้เปลี่ยน

    This is our new cable.


    รอยสายผ่านปลอกที่เราทะลวงเรียบร้อยแล้ว และทำการบักกรีเข้ากับหัว USB

    Route the new cable through the drilled plastic boot and solder it to a USB Connector.


     ลำดับการเชื่อมสายจะเป็นดังนี้
  • USB +5V  ->  ส้ม + ขาวส้ม
  • USB Data(-)  ->  ขาวเขียว
  • USB Data(+) ->  เขียว
  • USB Ground ->  ฟ้า + ขาวฟ้า
  • ปลอก -> น้ำตาล + ขาวน้ำตาล (หรือ Shield ของสาย STP)
     จากนนั้นทำการประกอบปลอกพลาสติกกลับเข้าที่  และทำซ้ำกับหัวอีกด้านหนึ่งก็เป็นอันเสร็จสิ้น  หากต้องการความเรียบร้อยสามารถใช้กาวหรือหัวแร้งเชื่อมรอยเจาะให้ปิดสนิดได้.

     Soldering diagram
  • USB +5V  ->  Orange + Orange stripped White.
  • USB Data(-)  ->  Green stripped White.
  • USB Data(+)  ->  Green
  • USB Ground  ->  Blue + Blue stripped White.
  • Metallic Connector  ->  Brown + Brown stripped White. (Or cable shield for STP Cable)
     Put the plastic boot back in place.  Then repeat the procedure for the other end and that's it.
     For decorative you can glue or weld(with soldering iron) the incision together.  


ผลการทดสอบ
Result




     หลังจากที่ได้ทดลองใช้สายนี้ดูแล้วก็พบว่าสามารถใช้งานได้ดี  รองรับ USB 2.0 ได้  หลังจากผ่านมาแล้วกว่า 1 ปี สายเส้นนี้ก็ยังสามารถใช้งานได้ดีอยู่เหมือนเดิมครับ

    The result was very impressive. The cable works the way it should. I've been using this cable for over a year and it still remains the same. And yes it's USB 2.0 support.