Tuesday, December 23, 2014

Installing LED Projector (Celling Mount)



    วันนี้เราจะมาติดตั้ง Projector กันครับ โดย Projector ที่ใช้คือ Vivitek QUMI Q2 เป็น Projector พกพาระบบ LED เนื่องจากมีอายุหลอดที่นานถึง 30,000 ชั่วโมง และการใช้งานสามารถ เปิด-ปิด เครื่องได้ทันทีไม่ต้องรอ Cool-down แต่ข้อเสียของ Projector ระบบนี้ก็คือส่วนใหญ่จะมีความสว่างที่น้อยกว่าเครื่องทั่วไป สำหรับเครื่องนี้อยู่ที่ 300 lumen เท่านั้น ทำให้ต้องการห้องที่สามารถควบคุมแสงได้ดี (มืด) ที่จริงรุ่นใหม่ที่สว่างกว่านี้ก็มี แต่ที่เลือกรุ่นนี้เพราะลดราคา(ตกรุ่น) นั้นเอง แต่ก็ไม่ใช้ปัญหาเพราะห้องที่ติดตั้งมีม่าน UV อยู่แล้ว และความละเอียดระดับ 720p (1280 x 800) ซึ่งเป็นระดับที่สามารถใช้ดูหนังได้ดีพอสมควร (ถ้าความละเอียดต่ำกว่านี้จะไว้ Present งานมากกว่า)

    ส่วนจอรับภาพที่ใช้เป็นของ Acer แบบมือดึงธรรมดา Gain 1.0 ขนาด 70 x 70 นิ้ว (เวลาฉาย 16:9 จะเท่ากับโทรทัศน์ประมาณ 80 นิ้ว)

    ก่อนที่จะติดตั้ง Projector เราควรจะมีการคำนวณระยะและทดลองฉายดูก่อน  เนื่องจาก Projector แต่ละตัวมีระยะฉายที่แตกต่างกัน โดยจะบอกเป็น Throw ratio เป็นอัตราส่วนของ ระยะที่ฉาย / ความกว้างของภาพที่ฉาย เช่นเครื่องนี้ Throw ratio 1.55 ก็จะได้ภาพกว้าง 67 นิ้ว ที่ระยะ 67 x 1.55 = 103.85 นิ้ว เป็นต้น หรือง่ายกว่าก็ใช้ http://www.projectorcentral.com/Vivitek-Qumi_Q2-projection-calculator-pro.htm

คำนวนเอาก็ได้ครับ



    LED Projector has the advantage of 30,000 hours of lamp life so I won’t have to count for a replacement bulb. Also by using LED Lamp mean it can be turn on-off instantly. The only limitation was its brightness was only 300 lumen which means to make a good projection your room has to be almost completely dark. (My room already had a UV curtain, so not a problem.) The projector is Vivitek’s QUMI Q2 LED Projector (A little-bit outdated but found on-sale). It’s 720p which is entry-level multimedia projector.

    The screen is an Acer standard manual pull-down 70 x 70-inch screen (Gain 1.0). Projection in 16:9 mode equivalents to about 80” TVs screen.

  Before installing a projector you should calculate a projecting distance and test fire before real installation because the throw ratio of each projector model is different, in this case, the throw ratio is 1.55 which mean we will get a 67” width picture with a projector 67 x 1.55 = 103.85” from screen. Or use the calculator at




นี้คือเครื่องที่จะติดตั้งครับ

Projector to be install.



ทดสอบระยะฉาย

Test Range



Projector นี้ใช้ตัวยึดแบบขาตั้งกล้องครับ

Projector has mounting point for the camera tripod.



ชุดอุปกรณ์ติดเพดาน และสาย HDMI ยาว 15 เมตร

Celling mount kit and 15 meter HDMI cable.



ชุดติดตั้งไม่ได้ออกแบบมาสำหรับ Projector ขนาดเล็ก จึงต้องมีการดัดแปลงตัวยึดกันนิดหน่อย โดยน็อตที่ใช้ยึดเป็นน็อตยึดเหล็กฉากที่หาได้ตามร้านก่อสร้างทั่วไปครับ


This ceiling mount kit doesn’t have a mounting hole and screw for this small projector so a little mod is needed. The screw used to mount a projector can be found in the local hardware shop.




ติดตั้งกับเพดานโดยใช้พุกเหล็ก

Projector mounted to the ceiling using a steel anchor.



สำหรับ Screen เนื่องจากกำแพงเดิมมีโคมไฟและโทรทัศน์ติดอยู่ จึงต้องติดตั้งให้ห่างออกมาจากกำแพง 25 เซนติเมตร โดยใช้ขาแขวนหิ้งและตะขอรูปตัว S ครับ


For screen installation, we use a pair of wall shelf bracket and a pair of S-hook, hanging distance is 25 centimeter from the wall (away from wall lamp and TV).


ขาแขวนหิ้งจะมีพุกพลาสติกมาให้ในชุด แต่เพื่อความแข็งแรง เราจะใช้พุกเหล็กแทน (กลัวหล่น)

The bracket came with a plastic fixer, but a safety reasons, I use a steel anchor instead.
  


ตำแหน่งที่แขวนอยู่หน้า TV 32 นิ้ว (ไว้ใช้สำหรับดูตอนเปิดไฟ)

The screen is hanging in front of the TV (32” LCD for daytime TV watching.)





เนื่องจากเป็น Projector ระบบ LED และไม่มีปุ่มปิดเปิดบน Remote จึงใช้วิธีต่อผ่านสวิตซ์ไฟ เพื่อความสะดวก


Since this projector is LED type and its remote doesn’t even have a power button, A wall switch was repurposed for controlling a projector.




อุปกรณ์ที่ใช้เล่นหนัง HD เป็น Raspberry Pi ที่ติดตั้งโปรแกรม OpenElec (XBMC). ส่วนระบบเสียง 5.1 ใช้ HDMI ผ่าน AVR เอาครับ


The movie is played from Raspberry Pi running an OpenElec (XBMC) software. Audio system 5.1 is via HDMI through AVR.


ทดสอบ
Test Run




ปิดไฟ
Light off.

 

Camera Canon EOS400D @ ISO1600 1/25 sec f/4.5
 



ทดสอบกับ XBOX360
Gaming test (XBOX360)




Openelec.





สรุปผล
    ภาพที่ได้ค่อนข้างน่าพอใจ ให้ภาพได้สว่าง คมชัด สีสดใส (ในห้องมืดสนิด). มีปัญหาในการใช้งานเล็กน้อยคือ Focus ของเครื่องจะเปลี่ยนไปเล็กน้อยเมื่อเครื่องร้อนขึ้น  ซึ่งแก้ได้ด้วยการเปิดเครื่องทิ้งไว้ประมาณ 10 นาที ก่อนใช้งาน เพื่อให้อุณหภูมิเลนส์นิ่งก่อน

Conclusion:
    Resulting image is pretty good, clear, and bright (in an almost completely dark room). The only glitch was minor focus shift problem (need to wait around 10 minutes after turn-on for projector lens to warm-up before the image return to the focus.)